|
The Drive-On Wash Pad–design your own wash pad
The Drive-On Wash Pad is ideal for large equipment and vehicle fleet
washing. Build a wash pad that's just the right size for your needs. |
|
Innovations in wash pads
Independent multiple leveling feet accommodate uneven ground, no shimming required.
Hemmed edge on walls eliminate sharp edges, and creates a thicker rigid wall for safety
This detail shows the curved wall as it meets the
deck. This key feature, directs water back towards the gutter
preventing seepage, a true self-contained wash pad. |
| Drive-On Wash Pads can be combined to create a pad up
to a total width of 14 feet, 4 inches and 24 feet long. Each gutter is
2 feet wide and 12 feet long. All Wash Pads have an option of a 2 or
4-foot wall to contain wash water and for a safer work environment. All
products are constructed to resist corrosion for a long life
expectancy. The aboveground pad design is easy to maintain, avoids soil
and groundwater contamination, and is easy to install—permits usually
not required. |
|
|
There are over 90 configurations possible with our modular
design. Below are the most common configurations. To ensure the best
results for your business, call for an evaluation. |
|
|
|
|
|
|
 |
|
|
Features:
• This wash pad is ideal for large or small, wheeled equipment
• Collection trough is mounted on the side to protect it from damage
• Curved wall to prevent seepage
• Independent feet for better water runoff
• Hemmed wall edges for safety and structural support
• Tube frame chassis for better weight distribution
Specifications:
• Drive-On Pad: 7' 2'' x 12' constructed with steel tube perimeter frames and 1/4, 1/2 and
3/4 inch solid steel deck plate
• Walls: 2' or 4' wall height available (measured from the pad up), custom heights available
• Gutter: Each gutter is 2' wide x 12' long, low or high solids set-up available
• Steel Ramps: 6' wide x 6' long or 8' wide x 6' long available, both with a seven degree
(7°) incline
• Aluminum Ramp: 6' wide x 4' long with a ten degree (10°) incline
|
|
1/4 thickness |
1/2 thickness |
3/4 thickness |
|
Capacity per pad |
5,000 pounds |
10,000 pounds |
15,000 pounds |
|
Loading per square foot |
3,750 pounds |
7,500 pounds |
12,000 pounds |
|
Loading per square inch |
25 pounds |
50 pounds |
80 pounds |
Remediation and recycling option available, check with your sales representative.
|
|
|
